 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| * Input Parameter Input voltage Line frequency Input current Inrush current (cold start) Leakage current @110VAC @220VAC @110VAC @220VAC @110VAC @220VAC Conditions/Description AC input DC input FSK10 Series AC/DC Converters Min 85 110 47 Nom Max 264 340 400 0.21 0.11 30 60 0.5 0.75 Units VAC VDC Hz Amps Amps Amps Amps mA mA Output Parameter Set point accuracy Line regulation 2 (Low line to high line) Load regulation, static 2 Load regulation, dynamic 2 Temperature drift Hold-up time Minimum load Ripple & noise Conditions/Description Single output models Main output Aux. outputs Main output Min -2% -1.0% -1.0% -2.0% -3.0% -1.0% 10 0.0 20 MHz bandwidth 1.0%Vout Nom Max +2% +1.0% +1.0% +2.0% +3.0% +1.0% ms Amps mVpp Units Note 2. To maintain specified regulation, it is required to have a minimum 10% load on the main output, and a 20% load on each auxillary output. Under no load conditions, operations will not damage the devices, but all specified regulation may not be met. Protection Parameter Over-current Over-voltage Over-temperature Note 3. Conditions/Description Continuous auto Internal clamping Thermal shut down recovery 3 Min 105% 115% Nom Max 135% 140% 145 Units C Continuous operation in a protected state may compromise long-term reliability. General Parameter Efficiency Isolated Dielectric withstand Conditions/Description Typical at full load Input/Output Input/FG Output/FG Input/Output (all at 500 VDC) Input/FG Output/FG 3K 2K 0.5K 100M 100M 70M Zn MIL-HDBK-217F -10 -20 10G, 10~55Hz, for 3 minutes 50G on X, Y & Z-axis, for 11ms Operating (non-condensing) Single-output models 20% 90% 90 RH grams 94 V-0 250k +60 +70 hours C C Min Nom 73% VAC VAC VAC Ohms Ohms Ohms Max Units Isolated Insulation resistance Agency standards Case material Material flammability MTBF Operating temperature Storage temperature Vibration Impact Humidity Weight Designed to meet UL1950, EN60950, CISPR22, CE, CB, FCC class B V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005 1-866-372-1258 w w w . v- inf init y .c om * FSK10 Series AC/DC Converters Pin assignments Single Single Output 1. FG 2. AC(N) 3. AC(L) 4. 5. 6. 7. 8. No pin +Vout No pin -Vout No pin Dimensions All dimensions are in mm. Single output model 58 CL 8 18 Outside edge 1 18 1 7 2 IN 18 Label 3 8- 1.3 50 19.5 4 TOP VIEW 8- 1.0 4 50 4 (c) V-INFINITY (R) The information and specifications herein are believed to be correct at time of publication. However, V-INFINITY LLC ac cepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 8 3 18 8 5 8 OUT 6 45 5 8 2 6 8 7 8 8 8 V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005 1-866-372-1258 www.v-infinity.com |
Price & Availability of FSK-S10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |